BTU-TECH, super fast develops a CNC 2D printer for a wind blade core kit producer!
Wind blades contain foam or wood material as core material to achieve a sandwich laminate structure to be rigid, yet lightweight. All these core materials need to be pre-cut and shaped into hundreds of different forms so that they can be placed perfectly into the mould conforming the 3D geometry of the wind blade mould. […]
BTU-TECH completes a new cutter design for slitting fabric rolls, “Roll Slitter”
Most textile lines have fixed widths. Even though some can be changed, in most times, it is not feasible for the textile operations. So, when there is a demand for a different width smaller than the line width, then the manufacturer has to cut the fabric online with an online slitting system which is costly […]
First BTU-TECH product for CNC Fabric cutting companies, “Roll Feeder”!
BTU-TECH, solves one the of the main challenges of CNC fabric cutters. Precise fabric feeding to the CNC fabric cutting table! BTU-TECH customer was willing to get rid of tension problems on the cut fabric that is fed from the roll to the CNC cutter. BTU-TECH came up with the right solution designing and offering […]
BTU-TECH “Cross Cutter” released to the market!
There are multiple ways to cut a fabric at the end of the roll. BTU TECH received a cross cutter design request based on shear cutting principle where the fabric is cut with slowly rotating mechanical blades rather than a motorized diamond blades, not to create dust, waste and thickening during cutting. The first product […]
BTU-TECH “Short Roll Winder” is on stage!
With a demand from a fabric kitting customer, BTU-TECH has developed a modern and automated “Short Roll Winder” which can split jumbo fabrics to short rolls. With sophisticated metering, tension and edge track controls, the winder can automatically produce short rolls by a list of roll meters entered to its system. The winder is commissioned […]
BTU-TECH delivers its first Chamfer Cutter to glass fabric kitting company
Chamfer cutter eliminates a major problem in fabric layup in composite moulds where the overlapped fabrics make an extra thickness and leads to non-homogeneous thickness in the laminate. The simple cutter developed by BTU-TECH is a semi manual first machine that cuts the glass fabrics at a certain angle so that it has a trimmed […]
BTU-TECH “Roll Loader – Unloader”, safe and fast way to handle rolls!
Winding and unwinding operation with heavy rolls require heavy air shafts and safety chucks for a safe operation. Placing and removing the extremely heavy loaded shafts from a safety chuck which has less than a milimeter gap tolerance with the shaft flanges, is a painful process where most of the time operators get their hands […]
BTU-TECH offering “cutting” edge machinery, “Online Slitting Systems” !
Mechanically changing the width of the fabric lines is not feasible for the textile operations. If there is a demand for a different width, then the fabric has to be cut online with an online slitting system which consists of a lower blade shaft, lower blades, upper blades and a service platform. BTU-TECH provides ready […]
More control on multiaxial non-crimp fabric lines, BTU-TECH Take-up Systems
A certain generation of multiaxial machines which produces ncf glass and carbon fabrics, have a simple non-motorized take-up system. The operators need to mechanically and manually adjust it for certain tension conditions. BTU-TECH developed a full electronic motorized system that replaces the old system where the take up works perfectly synchronised with the transport chain […]
BTU-TECH’s new solution for multiaxial fabric manufacturers: “Multiaxial Conveyor Hook Pin Break Sensor”
On a glass or carbon fiber warp knitting multiaxial machine, there are thousands of hook pins to hold the layed fibers in place. If pins get broken, the fibers cannot be layed creating gaps and loose elements in the fabric. If this is not detected, the entire manufactured fabric may become waste or second quality. […]
